Plastic Mash Paddle
Plastic, 25”
Walnut Mash Paddle
36”, Carved from a single piece of beautiful walnut wood.
Stainless Steel False Bottom
12” or 9” round. Sits in the bottom of a kettle or cooler. Fitted with brass “elbow” for connecting any necessary tubing.
Weldless Cooler Ball-Valve
Stainless steel. Replaces Rubbermaid cooler spigot. No modifications to the cooler are necessary. Easily turn a 5 or 10 gallon cooler into a Mash/Lauter Tun. Works great with the Bazooka screen.
Weldless Kettle Ball-Valve
Stainless steel full port ball-valve and 1/2” barb.
Allows you to attach a spigot to a boil kettle with no welding necessary. Requires a 7/8” drilled hole in your kettle to install.
Stainless Steel Kettle Screen
12” in length, 1/2” diameter steel mesh screen with 1/2” NPT connection. Use in a brew pot or a mash tun.
Specially designed burner heats faster and is the most efficient burner on the market. Can be used alone, sitting on the ground, or connected to a Blichmann™ TopTier™ Brew Stand.
60°F to 220°F. Comes in the both a 1/2” NPT (for threading into an existing port) and weld-less design. Can be re calibrated if needed. Made of stainless steel.
Siphon Spray Wort Aerator
Increase the amount of dissolved oxygen in your wort before pitching the yeast. Simply attach the Wort Aerator to the end of the tubing that you use to transfer the wort from the boil kettle to the fermenter. Simple, but effective. Also can be used to build a nice sparging mechanism.
Sparge Arm Assembly
Includes instructions, plastic aerator, four silicone rings, 10“ x 3/8” stainless steel tube, 4 plastic rods, and a drilled plastic tee. Makes fly sparging much easier.
$34
$35
$40
$34
$4.5
$16.50
$65
$138.00
$3
$24
$36.00
$38.00